High Load Strap Hinges

Capable of holding loads greater than 500 pounds, these strap hinges are fully machined and welded. They are manufactured to close tolerances provide an extremely precision hinge.

The 667 series high load strap hinge is a surface mounted, bronze bearing hinge manufactured by welding and machining. These hinges are designed for outdoor and harsh environments. The pin is stainless steel to prevent corrosion. Bearings consist of two bronze thrust washers and two bronze sleeves for reduced friction. Oil fittings come standard to allow preventative maintenance. These hinges can be mounted by welding or predrilled mounting holes can be added.

Part No.MaterialABxCDxEFGWeightCapacity
667512Mild Steel3/86x2-1/22x121-1/27/87.2950
667514Mild Steel3/87x3-1/22-1/2x181-1/27/810.91100
667616Mild Steel1/28x3-1/23x241-3/4118.21500
667620Mild Steel1/210x4-1/24x3021-1/831.81800
  • Dimensions in inches. Weights and capacities in pounds.
  • Capacities correlate to the weight of the door only and assume a minimum of two hinges per door. Capacities aren’t additive.
  • Custom sizes available upon request.
  • Unless otherwise specified, quotes will be based on Standard features below
ItemStandard Features
Pin MaterialStainless Steel
Hinge Material* See Table *
Pin StyleSemi Removable
Mounting SurfaceSurface Mounted
Mounting HolesNone, Weld On
Thrust BearingsOilite Bronze Washers
Radial BearingsOilite Sleeves
Lube FittingOil Fitting