Adjustable Hinges

The 654 series high load adjustable hinge is a surface mounted, full bearing hinge manufactured by welding and machining. These hinges can be adjusted vertically, which aids in installation or to compensate for door sag. The pin is a heat treated alloy steel to provide added strength. Bearings consist of thrust bearings and radial bearings. Grease fittings come standard to allow preventative maintenance. These hinges can be mounted by welding or predrilled mounting holes can be added. Daro has manufactured adjustable hinges for doors weight up to 140,000 pounds!

Part No.ABxCDEWeightCapacity
6545003/85x41-1/27/84.71050
6546011/26x61-3/4192200
6546051/26x621-1/8103200
6546111/27-1/2 x 621-1/812.54000
6546123/48x821-1/8215000
654905110x82-1/21-3/8377000
6549841-1/412x1242-1/49011000
6549891-1/416x1642-1/414015000
6549991-3/416x1652-3/419025000
  • Dimensions in inches Weights and capacities in pounds.
  • Capacities correlate to the weight of the door only and assume a minimum of two hinges per door. Capacities aren’t additive
  • Custom sizes available upon request.
  • Unless otherwise specified, quotes will be based on Standard features below.
  • Other axis or multiple axis adjustability can be manufactured upon request.
ItemStandard Features
Pin Material440C Stainless
Hinge MaterialMild Steel*
Pin StyleRemovable
Mounting SurfaceSurface Mounted
Mounting MethodNone, Weld On
HandRight or Left**
FinishNone
AdjustableUp/Down
Thrust BearingsBall Thrust Bearings
Radial BearingsNeedle Roller Bearings
Lube FittingGrease Fitting

Click here for Optional Features
* Stainless steel available upon request
** See Engineering Page for determining correct hand of hinge